U-Boot 2017.05-00008-g6a9ddb8303-dirty (May 19 2020 - 19:48:01 +0900) for ODROID-XU4 CPU: Exynos5422 @ 800 MHz Model: Odroid XU4 based on EXYNOS5422 Board: Odroid XU4 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 MMC Device 0 ( SD ): 29.8 GiB Card did not respond to voltage select! mmc_init: -95, time 12 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 reading /boot.ini 2365 bytes read in 4 ms (577.1 KiB/s) ## Executing script at 43e00000 reading config.ini 7156 bytes read in 6 ms (1.1 MiB/s) ini: Imported macaddr as 00:1e:06:61:7a:39 ini: Imported vout as hdmi ini: Imported HPD as true ini: Imported cecenable as false ini: Imported disable_vu7 as false ini: Imported ddr_freq as 825 ini: Imported overlay_resize as 16384 ini: Imported overlay_profile as ini: Imported overlays as spi0 i2c0 i2c1 uart0 No FDT memory address configured. Please configure the FDT address via "fdt addr
" command. Aborting! reading zImage 6407296 bytes read in 429 ms (14.2 MiB/s) reading uInitrd 10312560 bytes read in 688 ms (14.3 MiB/s) reading exynos5422-odroidxu4.dtb 87167 bytes read in 13 ms (6.4 MiB/s) reading overlays/spi0.dtbo 691 bytes read in 7 ms (95.7 KiB/s) reading overlays/i2c0.dtbo 224 bytes read in 6 ms (36.1 KiB/s) reading overlays/i2c1.dtbo 226 bytes read in 5 ms (43.9 KiB/s) reading overlays/uart0.dtbo 227 bytes read in 6 ms (36.1 KiB/s) Kernel image @ 0x40008000 [ 0x000000 - 0x61c480 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 10312496 Bytes = 9.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 reserving fdt memory region: addr=44000000 size=2c000 Using Device Tree in place at 44000000, end 4402efff Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 5.4.87-218 (root@1604_builder_armhf) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #1 SMP PREEMPT Wed Jan 6 16:24:35 EST 2021 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0xb6800000 [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Running under secure firmware. [ 0.000000] percpu: Embedded 20 pages/cpu s52364 r8192 d21364 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928 [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0 HPD=true vout=hdmi usbhid.quirks=0x0eef:0x0005:0x0004 smsc95xx.macaddr=00M [ 0.000000] hdmi: using HDMI mode [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1899048K/2074624K available (9216K kernel code, 778K rwdata, 2752K rodata, 1024K init, 321K bss, 44504K reserved, 131072K cma-reserved, 1157120K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x508 with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000008] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000033] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49 [ 0.001662] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.001682] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.001702] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001715] Ignoring duplicate/late registration of read_current_timer delay [ 0.002257] Console: colour dummy device 80x30 [ 0.002902] printk: console [tty1] enabled [ 0.002955] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002997] pid_max: default: 32768 minimum: 301 [ 0.003224] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003270] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004481] CPU: Testing write buffer coherency: ok [ 0.005043] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.005985] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.006315] ARM CCI driver probed [ 0.006918] Exynos MCPM support installed [ 0.007245] rcu: Hierarchical SRCU implementation. [ 0.009757] soc soc0: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422001] REV[0x1] Detected [ 0.010304] smp: Bringing up secondary CPUs ... [ 0.011331] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.012547] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.013628] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.014715] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.014726] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.015979] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015988] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.017202] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.017211] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.018381] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.018390] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.018616] smp: Brought up 1 node, 8 CPUs [ 0.018665] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.018688] CPU: All CPU(s) started in HYP mode. [ 0.018708] CPU: Virtualization extensions available. [ 0.019861] devtmpfs: initialized [ 0.040395] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.040894] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.040934] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.043407] pinctrl core: initialized pinctrl subsystem [ 0.045890] NET: Registered protocol family 16 [ 0.049211] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.050766] audit: initializing netlink subsys (disabled) [ 0.050992] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1 [ 0.051745] cpuidle: using governor menu [ 0.052356] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.052383] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.110748] EXYNOS5420 PMU initialized [ 0.217686] iommu: Default domain type: Translated [ 0.218153] usbcore: registered new interface driver usbfs [ 0.218224] usbcore: registered new interface driver hub [ 0.218405] usbcore: registered new device driver usb [ 0.219067] s3c-i2c 12c70000.i2c: slave address 0x00 [ 0.219095] s3c-i2c 12c70000.i2c: bus frequency set to 378 KHz [ 0.219377] s3c-i2c 12c70000.i2c: i2c-0: S3C I2C adapter [ 0.219625] s3c-i2c 12c80000.i2c: slave address 0x00 [ 0.219652] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 0.219912] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 0.220393] mc: Linux media interface: v0.10 [ 0.220444] videodev: Linux video capture interface: v2.00 [ 0.220559] pps_core: LinuxPPS API ver. 1 registered [ 0.220580] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.221017] Advanced Linux Sound Architecture Driver Initialized. [ 0.222042] clocksource: Switched to clocksource mct-frc [ 0.274068] random: fast init done [ 0.909646] VFS: Disk quotas dquot_6.6.0 [ 0.909735] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.921333] thermal_sys: Registered thermal governor 'step_wise' [ 0.923758] NET: Registered protocol family 2 [ 0.924488] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.924540] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.924634] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.924803] TCP: Hash tables configured (established 8192 bind 8192) [ 0.924926] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.924982] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.925223] NET: Registered protocol family 1 [ 0.925914] RPC: Registered named UNIX socket transport module. [ 0.925937] RPC: Registered udp transport module. [ 0.925957] RPC: Registered tcp transport module. [ 0.925976] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.926251] Trying to unpack rootfs image as initramfs... [ 1.081188] Freeing initrd memory: 10072K [ 1.082932] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.083717] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.087928] Initialise system trusted keyrings [ 1.088167] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.097811] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.098660] NFS: Registering the id_resolver key type [ 1.098699] Key type id_resolver registered [ 1.098719] Key type id_legacy registered [ 1.098748] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.098802] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 1.129753] Key type asymmetric registered [ 1.129777] Asymmetric key parser 'x509' registered [ 1.129845] bounce: pool size: 64 pages [ 1.129894] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.130189] io scheduler mq-deadline registered [ 1.130211] io scheduler kyber registered [ 1.130376] io scheduler bfq registered [ 1.132973] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator [ 1.134012] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator [ 1.134166] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator [ 1.134570] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator [ 1.134688] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator [ 1.143760] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 1.143791] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.146617] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 1.146646] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.147555] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 1.147583] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.220739] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.223150] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 62, base_baud = 0) is a S3C6400/10 [ 1.223591] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 63, base_baud = 0) is a S3C6400/10 [ 2.116254] printk: console [ttySAC2] enabled [ 2.122246] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 2.128598] exynos-mixer 14450000.mixer: Adding to iommu group 0 [ 2.136295] exynos-drm-g2d 10850000.g2d: Adding to iommu group 1 [ 2.142426] exynos-rotator 11c00000.rotator: Adding to iommu group 2 [ 2.154976] mali 11800000.gpu: Failed to get regulator [ 2.158679] mali 11800000.gpu: Power control initialization failed [ 2.176645] brd: module loaded [ 2.179059] libphy: Fixed MDIO Bus: probed [ 2.182677] usbcore: registered new interface driver r8152 [ 2.187841] usbcore: registered new interface driver cdc_ether [ 2.193634] usbcore: registered new interface driver cdc_subset [ 2.201752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.206848] ehci-exynos: EHCI EXYNOS driver [ 2.211335] exynos-ehci 12110000.usb: EHCI Host Controller [ 2.216470] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 2.224399] exynos-ehci 12110000.usb: irq 82, io mem 0x12110000 [ 2.242074] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 2.246938] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.254889] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.262075] usb usb1: Product: EHCI Host Controller [ 2.266920] usb usb1: Manufacturer: Linux 5.4.87-218 ehci_hcd [ 2.272641] usb usb1: SerialNumber: 12110000.usb [ 2.277828] hub 1-0:1.0: USB hub found [ 2.281014] hub 1-0:1.0: 3 ports detected [ 2.285911] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.291127] ohci-exynos: OHCI EXYNOS driver [ 2.295469] exynos-ohci 12120000.usb: USB Host Controller [ 2.300644] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 2.308375] exynos-ohci 12120000.usb: irq 82, io mem 0x12120000 [ 2.378324] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 2.385157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.393011] usb usb2: Product: USB Host Controller [ 2.397102] usb usb2: Manufacturer: Linux 5.4.87-218 ohci_hcd [ 2.402821] usb usb2: SerialNumber: 12120000.usb [ 2.407981] hub 2-0:1.0: USB hub found [ 2.411192] hub 2-0:1.0: 3 ports detected [ 2.417402] mousedev: PS/2 mouse device common for all mice [ 2.422776] i2c /dev entries driver [ 2.448420] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV [ 2.465952] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV [ 2.486812] vdd_sd: Bringing 3300000uV into 2800000-2800000uV [ 2.566833] s5m-rtc s2mps14-rtc: registered as rtc0 [ 2.570846] s2mps11-clk s2mps11-clk: DMA mask not set [ 2.579025] s5p-jpeg 11f50000.jpeg: Adding to iommu group 3 [ 2.583528] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video20 [ 2.590460] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video21 [ 2.597379] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec [ 2.603033] s5p-jpeg 11f60000.jpeg: Adding to iommu group 4 [ 2.608712] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video22 [ 2.615661] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video23 [ 2.622594] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec [ 2.628761] s5p-mfc 11000000.codec: Adding to iommu group 5 [ 2.651761] s5p-mfc 11000000.codec: preallocated 16 MiB buffer for the firmware and context buffers [ 2.659500] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v8.fw failed with error -2 [ 2.668077] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 2.678637] s5p-mfc 11000000.codec: decoder registered as /dev/video10 [ 2.685110] s5p-mfc 11000000.codec: encoder registered as /dev/video11 [ 2.693570] exynos-gsc 13e00000.video-scaler: Adding to iommu group 6 [ 2.699761] exynos-gsc 13e10000.video-scaler: Adding to iommu group 7 [ 2.715813] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 2.723290] device-mapper: uevent: version 1.0.3 [ 2.727564] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 2.752438] sdhci: Secure Digital Host Controller Interface driver [ 2.757159] sdhci: Copyright(c) Pierre Ossman [ 2.761679] Synopsys Designware Multimedia Card Interface Driver [ 2.768048] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 2.774407] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 2.780731] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 2.786129] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 84,64 bit host data width,64 deep fifo [ 2.795555] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq [ 2.800918] mmc_host mmc0: card is non-removable. [ 2.822183] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 2.843300] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 2.848752] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 2.855144] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 2.860524] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 85,64 bit host data width,64 deep fifo [ 2.885056] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 2.900368] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84) [ 2.908445] ledtrig-cpu: registered to indicate activity on CPUs [ 2.915520] s5p-secss 10830000.sss: s5p-sss driver registered [ 2.920329] hidraw: raw HID events driver (C) Jiri Kosina [ 2.933546] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp [ 2.938852] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp [ 2.945425] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp [ 2.952022] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp [ 2.958489] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125) [ 2.959560] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0_0) [ 2.976421] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0_1) [ 2.983945] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1_0) [ 2.991802] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1_1) [ 3.001914] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0 [ 3.008616] exynos-adc 12d10000.adc: IRQ index 1 not found [ 3.019441] NET: Registered protocol family 17 [ 3.022435] NET: Registered protocol family 15 [ 3.022983] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.023443] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 100000Hz, actual 100000HZ div = 250) [ 3.026937] Key type dns_resolver registered [ 3.050810] Registering SWP/SWPB emulation handler [ 3.055236] registered taskstats version 1 [ 3.059165] Loading compiled-in X.509 certificates [ 3.064037] Key type ._fscrypt registered [ 3.067911] Key type .fscrypt registered [ 3.081491] Key type encrypted registered [ 3.146868] exynos-asv 10000000.chipid: cpu0 opp0, freq: 1500 missing [ 3.152050] exynos-asv 10000000.chipid: cpu4 opp0, freq: 2100 missing [ 3.161501] OF: graph: no port node found in /soc/hdmi@14530000 [ 3.168346] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations [ 3.174839] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0a6d040) [ 3.181359] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0a6d6c4) [ 3.188239] exynos-drm-g2d 10850000.g2d: The Exynos G2D (ver 4.1) successfully registered. [ 3.196156] exynos-drm exynos-drm: bound 10850000.g2d (ops 0xc0a6e60c) [ 3.202666] exynos-rotator 11c00000.rotator: The exynos rotator has been probed successfully [ 3.211052] exynos-drm exynos-drm: bound 11c00000.rotator (ops 0xc0a6ee98) [ 3.217894] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.224478] [drm] No driver support for vblank timestamp query. [ 3.230441] [drm] Cannot find any crtc or sizes [ 3.235922] [drm] Cannot find any crtc or sizes [ 3.239612] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 [ 3.249483] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0 [ 3.255047] mali 11800000.gpu: Protected mode not available [ 3.260966] mali 11800000.gpu: Probed as mali0 [ 3.266131] dwc3 12000000.dwc3: Failed to get clk 'ref': -2 [ 3.270776] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ 3.275728] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3 [ 3.283608] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 3.292768] xhci-hcd xhci-hcd.8.auto: irq 163, io mem 0x12000000 [ 3.299043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.306908] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.314096] usb usb3: Product: xHCI Host Controller [ 3.318946] usb usb3: Manufacturer: Linux 5.4.87-218 xhci-hcd [ 3.324666] usb usb3: SerialNumber: xhci-hcd.8.auto [ 3.329938] hub 3-0:1.0: USB hub found [ 3.333272] hub 3-0:1.0: 1 port detected [ 3.337405] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ 3.342609] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4 [ 3.350237] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed [ 3.356783] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.364908] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 3.367515] devfreq 11800000.gpu: Couldn't update frequency transition information. [ 3.373028] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.373033] usb usb4: Product: xHCI Host Controller [ 3.373037] usb usb4: Manufacturer: Linux 5.4.87-218 xhci-hcd [ 3.373041] usb usb4: SerialNumber: xhci-hcd.8.auto [ 3.373442] hub 4-0:1.0: USB hub found [ 3.391647] mmc1: tuning execution failed: -5 [ 3.392804] hub 4-0:1.0: 1 port detected [ 3.398450] mmc1: ddr50 tuning failed [ 3.398474] mmc1: new ultra high speed DDR50 SDHC card at address 0001 [ 3.408647] dwc3 12400000.dwc3: Failed to get clk 'ref': -2 [ 3.413556] mmcblk1: mmc1:0001 00000 29.8 GiB [ 3.416991] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller [ 3.423235] mmcblk1: p1 p2 [ 3.425441] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5 [ 3.451939] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 3.460712] xhci-hcd xhci-hcd.9.auto: irq 164, io mem 0x12400000 [ 3.467204] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 3.474789] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.481976] usb usb5: Product: xHCI Host Controller [ 3.486813] usb usb5: Manufacturer: Linux 5.4.87-218 xhci-hcd [ 3.492533] usb usb5: SerialNumber: xhci-hcd.9.auto [ 3.498184] hub 5-0:1.0: USB hub found [ 3.501108] hub 5-0:1.0: 1 port detected [ 3.505425] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller [ 3.510497] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6 [ 3.518127] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed [ 3.524695] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.532844] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 3.540896] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.548080] usb usb6: Product: xHCI Host Controller [ 3.552930] usb usb6: Manufacturer: Linux 5.4.87-218 xhci-hcd [ 3.558650] usb usb6: SerialNumber: xhci-hcd.9.auto [ 3.564274] hub 6-0:1.0: USB hub found [ 3.567265] hub 6-0:1.0: 1 port detected [ 3.572816] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 3.577371] s3c-rtc 101e0000.rtc: registered as rtc1 [ 3.585363] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz) [ 3.593355] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz) [ 3.601053] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz) [ 3.609268] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz) [ 3.617850] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz) [ 3.626385] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz) [ 3.634292] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz) [ 3.642238] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz) [ 3.650666] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz) [ 3.658577] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz) [ 3.666974] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz) [ 3.675132] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz) [ 3.683314] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz) [ 3.692095] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz) [ 3.700327] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz) [ 3.709359] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz) [ 3.722795] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:00:11 UTC (946684811) [ 3.781911] ALSA device list: [ 3.783520] No soundcards found. [ 3.789870] Freeing unused kernel memory: 1024K [ 3.793575] Run /init as init process Loading, please wait... Starting version 245.4-4ubuntu3.3 [ 4.236226] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 4.710177] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 4.734793] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 4.741528] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 4.748684] usb 6-1: Product: USB 10/100/1000 LAN [ 4.753343] usb 6-1: Manufacturer: Realtek [ 4.757413] usb 6-1: SerialNumber: 000001000000 [ 4.965187] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 5.035979] r8152 6-1:1.0 eth0: v1.10.11 [ 5.346697] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.351926] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 Begin: Loading[ 5.362287] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s essential drivers ... done. Begin: Running /scripts/init-premount [ 5.376157] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok [ 5.382164] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok [ 5.389025] dma-pl330 3880000.adma: PM domain MAU will not be powered off ... done. Begi[ 5.397955] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok n: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.34 [/usr/sbin/fsck.ext4 (1) -- /dev/mmcblk1p2] fsck.ext4 -y -C0 /dev/mmcblk1p2 e2fsck 1.45.5 (07-Jan-2020) rootfs: clean, 63192/1949696 files, 563213/7781888 blocks done. [ 5.571667] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 6.016727] systemd[1]: System time before build time, advancing clock. [ 6.103561] NET: Registered protocol family 10 [ 6.107651] Segment Routing with IPv6 [ 6.138709] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 defaul) [ 6.160497] systemd[1]: Detected architecture arm. Welcome to Ubuntu 20.04.1 LTS! [ 6.215356] systemd[1]: Set hostname to . [ 6.600289] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket �→ /run/dbus/system_bus_socket; please update the unit file accordin. [ 6.745140] random: systemd: uninitialized urandom read (16 bytes read) [ 6.754600] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 6.774289] random: systemd: uninitialized urandom read (16 bytes read) [ 6.780716] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 6.802212] random: systemd: uninitialized urandom read (16 bytes read) [ 6.808509] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 6.830631] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password �…ts to Console Directory Watch. [ 6.854515] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R�…uests to Wall Directory Watch. [ 6.879349] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary�…s File System Automount Point. [ 6.906365] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 6.930284] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 6.950233] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 6.970214] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 6.990224] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 7.011247] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 7.030654] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 7.054513] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 7.079014] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 7.102636] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 7.126689] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 7.146657] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 7.166441] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 7.186519] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 7.199419] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 7.229277] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 7.258457] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 7.283914] systemd[1]: Starting Journal Service... Starting Journal Service... [ 7.306918] systemd[1]: Starting Set the console keyboard layout... Starting Set the console keyboard layout... [ 7.332643] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st�…odes for the current kernel... [ 7.358512] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 7.367137] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.374894] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.392327] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 7.416203] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 7.449378] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 7.474687] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 7.498811] systemd[1]: Mounted Kernel Debug File System. [ 7.502118] EXT4-fs (mmcblk1p2): re-mounted. Opts: errors=remount-ro [ OK ] Mounted Kernel Debug File System. [ 7.519375] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Kernel Trace File System. [ OK ] Finished Set the console keyboard layout. [ OK ] Finished Create list of st�… nodes for the current kernel. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... Starting Apply Kernel Variables... [ 7.735431] systemd-journald[226]: Received client request to flush runtime journal. [ 7.749215] systemd-journald[226]: File /var/log/journal/dc87f36fc06c441a85ff7269ba4d50fb/system.journal corrupted or uncleanly shut down, renaming and replacing. Starting Create System Users... [ OK ] Mounted Kernel Configuration File System. [ 7.803987] random: crng init done [ 7.805930] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished udev Coldplug all Devices. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Found device /dev/ttySAC2. [ OK ] Found device /dev/disk/by-label/boot. Mounting /media/boot... [ OK ] Reached target Sound Card. [ OK ] Mounted /media/boot. [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Create Volatile Files and Directories... [ OK ] Finished Set console font and keymap. [ OK ] Finished Create Volatile Files and Directories. Starting Network Name Resolution... Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli�…ata Check for All Filesystems. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily man-db regeneration. [ OK ] Started Message of the Day. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Regular background program processing daemon. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... [ OK ] Started Save initial kernel messages after boot. Starting Remove Stale Onli�…t4 Metadata Check Snapshots... Starting LSB: Load kernel �…d to enable cpufreq scaling... Starting Dispatcher daemon for systemd-networkd... Starting Authorization Manager... Starting Restore /etc/reso�… the ppp link was shut down... Starting LSB: Run /etc/rc.local if it exist... Starting System Logging Service... Starting Login Service... Starting WPA supplicant... [ OK ] Finished Restore /etc/reso�…re the ppp link was shut down. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Finished Remove Stale Onli�…ext4 Metadata Check Snapshots. [ OK ] Started System Logging Service. [ OK ] Started LSB: Run /etc/rc.local if it exist. [ OK ] Started Login Service. [ OK ] Started WPA supplicant. [ OK ] Started Authorization Manager. Starting Modem Manager... [ OK ] Started LSB: Load kernel m�…ded to enable cpufreq scaling. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting LSB: set CPUFreq kernel parameters... Starting ODROID Specific System Tweaks... Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Started Unattended Upgrades Shutdown. [ OK ] Started ODROID Specific System Tweaks. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Finished Permit User Sessions. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Modem Manager. [ OK ] Started Serial Getty on ttySAC2. Starting Set console scheme... Starting Hostname Service... [ OK ] Started Dispatcher daemon for systemd-networkd. [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Finished Set console scheme. [ OK ] Created slice system-getty.slice. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Hostname Service. [ OK ] Listening on Load/Save RF �…itch Status /dev/rfkill Watch. Starting Network Manager Script Dispatcher Service... [ OK ] Finished Update UTMP about System Runlevel Changes. [ OK ] Started Network Manager Script Dispatcher Service. Ubuntu 20.04.1 LTS odroid ttySAC2 odroid login: